Interference Zone and Collision Protection FAQ
Q1: Which coordinate system is the manually filled interference zone value in, and how many methods are there?
- In Cartesian coordinates, the machine coordinates in the monitor can be viewed for specific data. 2. There are two setting methods: "manual filling" and "calibration".
Q2: Networked stamping: when this machine returns to the material pick-up standby point after picking up material, an error stops it inside the press, causing a collision
The program logic sends the pick-up complete signal while moving to the pick-up standby point; the stop caused by the error does not interrupt the front machine controlling placement stamping. The interference zone function should be enabled to make judgments