Position Search Process FAQ
Q1: After a successful position search, the new position is not stored in the set point variable
Change the position search type in the position search parameters from reference position search to correction position search
Q2: Megmeet welder arc position search, after finding the point it moves in reverse
The position search polarity is not enabled
Q3: After arc position search reaches the workpiece, there is no spark and no return
- Check whether the welder has a position search function, or whether the welder parameters are set accurately. 2. Check whether the return distance is set.
Q4: Arc position search is inaccurate
Perform single-point position search; if inaccurate, check the TCP.
Q5: When using two-point simple touch position search, the found point is incorrect.
When using two-point simple touch position search, "change posture" needs to be enabled in the tracking position search process parameter settings