Dobot CR10V Custom Adaptation
1 Robot Overview
The Dobot CR10V is a six-axis collaborative robot with high precision, high flexibility, and safety, suitable for various industrial scenarios.
2 Adaptation Parameters
2.1 Axis Parameters
| Axis | Type | Range | Speed | Acceleration |
|---|---|---|---|---|
| Axis 1 | Rotation | -180°~180° | 180°/s | 360°/s² |
| Axis 2 | Rotation | -90°~90° | 150°/s | 300°/s² |
| Axis 3 | Rotation | -90°~90° | 150°/s | 300°/s² |
| Axis 4 | Rotation | -180°~180° | 200°/s | 400°/s² |
| Axis 5 | Rotation | -90°~90° | 200°/s | 400°/s² |
| Axis 6 | Rotation | -180°~180° | 250°/s | 500°/s² |
2.2 Mechanical Parameters
| Parameter | Value | Unit |
|---|---|---|
| Working Radius | 1500 | mm |
| Repeatability | ±0.05 | mm |
| Maximum Payload | 10 | kg |
| Body Weight | 85 | kg |
3 Configuration Method
3.1 Import Configuration File
- Enter Settings > Robot Parameters > Slave Configuration
- Click [Import], select the Dobot CR10V configuration file
- Click [Save], restart the system
3.2 Parameter Adjustment
- Enter Settings > Robot Parameters > Motion Parameters
- Adjust each axis's speed, acceleration, and other parameters according to actual needs
- Click [Save], restart the system
4 Debugging Steps
4.1 Joint Jog Test
- Enter teach mode
- Select joint coordinate system
- Jog each axis individually, check if motion is normal
- Record each axis's limit positions
4.2 Linear Motion Test
- Teach multiple points
- Connect these points using MOVL instructions
- Run the program, check if linear motion is smooth
4.3 Payload Test
- Install rated payload at the end
- Run typical trajectory program
- Check if robot operation is stable and joint temperature is normal
5 Precautions
- The Dobot CR10V robot has a moderate working radius, suitable for working in limited spaces.
- Use low speed mode during initial debugging, gradually increase speed.
- Regularly check joint lubrication to ensure normal robot operation.
- If mechanical structure needs modification, re-calibrate parameters.
- When collaborating with humans, ensure safety measures are in place.
AI Retrieval Q&A (Q&A for Retrieval)
Q: What is the working radius of the Dobot CR10V?
A: The working radius of the Dobot CR10V is 1500mm.
Q: What is the maximum payload of the Dobot CR10V?
A: The maximum payload of the Dobot CR10V is 10kg.
Q: How to import the Dobot CR10V configuration file?
A: Enter Settings > Robot Parameters > Slave Configuration, click [Import], select the Dobot CR10V configuration file, click [Save], and restart the system.
Q: How to perform a joint jog test?
A: Enter teach mode, select joint coordinate system, jog each axis individually, check if motion is normal, and record each axis's limit positions.
Q: What is the repeatability of the Dobot CR10V?
A: The repeatability of the Dobot CR10V is ±0.05mm.
Q: What should be noted during debugging?
A: 1. The Dobot CR10V robot has a moderate working radius, suitable for working in limited spaces. 2. Use low speed mode during initial debugging, gradually increase speed. 3. Regularly check joint lubrication to ensure normal robot operation. 4. If mechanical structure needs modification, re-calibrate parameters. 5. When collaborating with humans, ensure safety measures are in place.
Q: How to adjust robot parameters?
A: Enter Settings > Robot Parameters > Motion Parameters, adjust each axis's speed, acceleration, and other parameters according to actual needs, click [Save], and restart the system.
Q: How to perform a payload test?
A: Install rated payload at the end, run typical trajectory program, check if robot operation is stable and joint temperature is normal.